B&B Truck Crane Store » » Auto Crane HC-12 Series

Auto Crane HC-12 Series

Part No: 475000014

Features and Benefits of the HC-12 Models

  • Automatic overload protection system. Keeps people, equipment, and loads safer.
  • Full, continuous power rotation. -370° movement for maximum versatility in lifting.
  • Capable of lifting at 100% in all positions on Titan® crane bodies with outriggers. Maximized capacity for lifting.
  • -12° to +75° boom elevation. Greater work area capability with maximum range of working angle limits.
  • Small sheave. Fits into tighter spaces.

Features and Benefits of NexStar™ Models

  • Proportional control of multiple functions simultaneously and independently. Adjust any function anytime to a different speed, for total control over the load.
  • Level sensors monitor the angle of the truck and crane with the NexStar FM remote system on a Titan® crane body. Prevents operation in unsafe, unlevel conditions.
  • Automatic stop at 100% load capacity. Keeps people, equipment, and loads safer.
  • Adjustable speed settings; from 25% to 100%. Enables fine tuning of speeds for total control over the load.
  • The NexStar FM remote system receiver displays load-monitoring and diagnostic readouts in plain English. No codes to look-up or memorize; operator views precise percentage load capacity.
  • NexStar available with either tethered or fully-featured wireless remote options. Your choice for preferred control method.
  • Transmitter is IP66 rated and CE certified. Sealed and water protected for maximum durability.


Capacity 12,000 lb (5,443 kg)
Rating 70,000 ft lb (9.68 tM); maximum lifting capacity of 12,000 lb (5,443 kg) at 6 ft. (1.83 m)
Weight 3,200 lb (1,451 kg)
Stowed Boom Length 15' 9" (4.8 m)
Extended Boom Length 30' (9.14 m)
Width 2' 3" (.68 m)
Height 3' 3" (.99 m)
Base Plate Dimensions 20.5" x 24.5" (.52 m x .62 m)
Single Line Speed 60 ft/min (18.3 m/min)
Boom Down 22-26 seconds (full stroke of cylinder)
Boom Retract 47-56 seconds (full stroke of cylinder)
360° Boom Rotation 35-43 seconds
Hydraulic Requirements 15 gpm (56.8 L/min) at 3,000 psi (206.8 bar)
Cable 120 ft (36.6 m) of 7/16" (11 mm) aircraft quality cable
Standards OSHA 1910.180, ANSI B30.5
Warranty Two-year factory warranty

You can find further specifications and literature here.


  • Truck must be equipped with 772020-000 outriggers or equal
  • 29,000 GVWR minimum chassis requirement. (Does not include bodies or accessories)
  • Minimum 1,000,000 in-lbs. RBM
  • Engine tachometer and throttle control required for proper crane installation
$42,042.00 $50,050.00